Reduce transport costs with better real-time visibility, transport orchestration and collaboration. Discover how to improve transport execution.

Want to reduce transport costs? Look beyond your planning

Reducing transport costs takes more than smarter planning. There is also plenty of room for improvement during transport execution. By spotting delays earlier, responding faster and sharing information more effectively between carriers, shippers and other parties involved.
Because however carefully you plan a trip, things rarely go exactly as expected. And with rising costs and a shortage of drivers, there is less and less room to absorb those disruptions.

Transport costs are rising. Where can you still save?

Transport is getting more expensive. According to a Panteia report commissioned by the Dutch industry associations TLN and evofenedex, costs in Dutch domestic road transport rose by 6.2% to 11.5% in 2026, including fuel costs. The impact of the Dutch truck toll comes on top of that. Panteia also expects further cost increases in 2027.
Finding additional capacity is not straightforward either. According to the Sector Monitor published by the Dutch Sector Institute for Transport and Logistics, 49% of businesses see staff shortages as an obstacle to their operations. At the end of June 2026, there were around 6,200 vacancies for truck drivers in the Netherlands.
Adding more vehicles or drivers is not always an option.
But how much capacity are we actually losing in day-to-day transport operations? Through waiting times, unnecessary phone calls or information that reaches the right person too late?

Good transport planning is just the beginning

A transport plan is an expectation. Not a guarantee.
A traffic jam on the motorway. An occupied loading bay. A driver waiting longer than expected. It’s all part of transport. But one delay can easily affect the rest of the day.
Imagine a truck arriving at a distribution centre 25 minutes late. The next trip is already scheduled, loading is pushed back and the transport planner is trying to find out what’s going on.
The plan was fine. Reality had other ideas.
That’s why transport efficiency is about more than optimising routes, kilometres and time windows. What matters just as much is what you do when things stop going according to plan.

Real-time transport visibility: seeing is one thing, taking action is another

Real-time transport monitoring shows you where vehicles are, which trips are running late and when estimated times of arrival (ETAs) change.
Useful. But knowing a truck will arrive late doesn’t solve anything on its own.
The real value lies in what happens next. Adjusting a loading slot, informing a delivery location or rescheduling a trip. Ideally before the delay becomes a problem for anyone else.
Yet in many transport operations, that still involves a lot of manual work. The planner sees an alert, calls the carrier, informs the distribution centre and updates the schedule. By then, the situation may already have changed.
That’s why moving from transport monitoring to transport control matters. It’s not just about knowing what’s happening. It’s about making sure the right people can act in time.

Sometimes the biggest efficiency gains lie between organisations

Every carrier tries to plan its own trips as efficiently as possible. Fair enough. But a transport network rarely consists of just one carrier, one planning system and one distribution centre.
And that’s where things get complicated.
A truck is delayed. The carrier knows, but the distribution centre doesn’t. The next loading slot stays unchanged. The driver gets a phone call, the planner starts rearranging things and someone at the distribution centre wonders where the truck has got to.
Everyone has part of the information. Nobody has the full picture.
That’s exactly why supply chain collaboration goes beyond exchanging data. A shipper wants to know when a delivery will arrive. A carrier needs to know whether the loading slot is still achievable. A charter needs up-to-date trip information. And a distribution centre wants to avoid trucks waiting unnecessarily.
Different priorities, same transport movement.
When information doesn’t flow properly between these parties, it leads to extra phone calls, manual checks and sometimes unnecessary waiting. Not because people aren’t doing their jobs, but because the systems and organisations involved aren’t working together effectively.
Better collaboration also makes transport more reliable. It won’t make a delay disappear. But it can stop that delay from catching everyone by surprise.

The efficiency of the entire transport chain depends not only on how well each organisation plans its own work, but also on how well they respond together when something changes.

Sometimes the biggest efficiency gains lie between organisations

Better supply chain collaboration doesn’t mean everyone has to use the same transport management system (TMS). In large logistics networks, that wouldn’t be particularly realistic anyway.
Shippers, carriers and charters all have their own software, processes and agreements. Replacing everything with one system? That’s a major undertaking. Time-consuming, expensive and not really necessary. After all, transport operations need to keep running in the meantime.
You can also connect existing systems, bringing planning information, vehicle locations, traffic data and trip changes together into one up-to-date view of transport execution.
When a trip changes, that update shouldn’t just appear on the planner’s screen. It should also reach the carrier, charter, driver and, where relevant, the receiving party.
That’s the idea behind transport orchestration, or cross-system transport coordination. Connecting different systems, data flows and organisations so transport can be monitored and managed together. Without having to rebuild the entire operation.
And ultimately, this isn’t just about technology. It’s about the people using it. A planner who spends less time on the phone. A driver who receives an updated stop in time. Or a distribution centre that can prepare for a later arrival.
Perhaps not the most spectacular innovation. But one that can make everyday work a lot easier.

How can you reduce transport costs during execution?

Keeping transport costs under control starts with understanding where time and capacity are being lost. Not just in the planning stage, but especially out on the road.
Here are four practical steps:

1. Look beyond the planned arrival time

Compare planned and actual arrival and departure times. Where do delays keep occurring? Which loading and unloading locations regularly cause bottlenecks? And how do those delays affect subsequent trips?
That’s how you find out where improvements are really needed.

2. Spot deviations before they become problems

A ten-minute delay doesn’t have to be a problem. Unless it means missing an important delivery window.
By combining traffic information with real-time trip progress, you can identify earlier which deviations actually need attention. That means planners don’t have to keep checking every single trip.

3. Share information with the people who need to act on it

An updated arrival time isn’t much use if only the carrier knows about it.
Make sure shippers, charters, drivers and delivery locations receive the information they need. On time and, wherever possible, automatically. This helps avoid unnecessary phone calls and decisions based on outdated information.

4. Use historical data to improve today's transport execution

What happened on the road yesterday can help you today.
By analysing historical trip data, you can spot patterns. Recurring waiting times, unexpected journey durations or loading and unloading locations where things consistently take longer than planned.
You can use those insights directly in your daily transport operations. For example, to calculate more realistic arrival times, identify bottlenecks earlier and respond more effectively while trips are underway. So you’re not just learning from the past. You’re making today’s execution smarter too.
And the impact can add up. Imagine an organisation handling 200 trips a day, with planners spending an average of two minutes less per trip on manual status checks. That’s 400 minutes a day, more than six and a half hours.
It’s an illustrative calculation, not a guaranteed saving. But it shows how small improvements can add up when you’re managing large transport volumes.

Transport efficiency doesn't stop at your own planning

The next step in transport efficiency isn’t just about even smarter routes or tighter schedules. It’s about making sure what was planned actually works during execution. Even when the day doesn’t go as expected.
That takes up-to-date information, the ability to respond while vehicles are on the road and good collaboration between everyone involved.
At Simacan, we take the same approach. With the Simacan Control Tower, we bring together different data streams. From planning and trip data from TMS systems and live vehicle locations from telematics to traffic information, estimated arrival times and changes along the way. We use this information for real-time transport monitoring, transport control and analysis. With the new Simacan Transport Planner, currently in development, we’re also bringing transport planning and execution closer together. Even when carriers, charters and other organisations use their own systems.
Not to replace everything, but to help existing processes work better together.
Because reducing transport costs can sometimes start with something quite simple. A delayed truck, and everyone knowing in time that it’s going to arrive late.
And, more importantly, what they do with that information.

Frequently asked questions

How can you reduce transport costs without adding more vehicles?

By making better use of existing transport capacity. For example, by reducing waiting times, identifying delays earlier, adjusting trips in time and improving information sharing between everyone involved. Which measures deliver the greatest benefit depends on your operation.

What's the difference between transport planning and transport control?

Transport planning determines in advance how trips should be carried out. Transport control focuses on execution and helps teams intervene when reality differs from the plan. Both are essential for efficient transport operations.

Why is supply chain collaboration important for transport efficiency?

Because transport often connects multiple organisations, systems and locations. When relevant trip information is available on time, carriers, shippers, charters and delivery locations can respond better to changes. This helps reduce unnecessary communication, waiting times and disruptions.
This might also interest you:

Transport Preparation

Successful logistics begins with strategic transport preparation. The Simacan platform revolutionizes traditional planning by integrating real-time data, intelligent validation, and seamless multi-planning capabilities. From vehicle

Read more »